Coupling to a Cable from Plane Wave

Model Description

This example considers coupling into simple cable located inside car from external plane wave. Cable paremeters are the following: core radius - 0.0003 m, insulation thickness - 0.0003 m, conductivity values - 5.76e+007 S/m, insulation material permittivity value - 2.3. Frequency range is 1 – 150 MHz

Solution is obtained in Susceptibility Hybrid Analysis Type. Susceptibility Hybrid Analysis Type is intended for immunity analysis of linear and non linear complex field-cable coupling problems in frequency and time domain. Analysis model is calculated with SPICE 3f5 compatible solver.

Susceptibility Hybrid approach in EMC Studio is based on the following scheme:

• Calculation of field distribution along the cable structure with full-wave solver TriD
  
• The transmission line circuit is supplemented with sources reflecting the incident field
• Analysis model is calculated with SPICE 3f5 compatible solver

Simulation Results

Voltage in Probe 1

Voltage in Probe 2

| < Previous | | Index | | Next > |