Application Examples

EMCoS > Application Examples > Radiation from TWP Cable to Planar Glass Antenna

  • Radiation from TWP Cable to Planar Glass Antenna

    Problem Definition

    Radiation from TWP N.901.916 cable to simple planar glass antenna is considered. Simulation results are obtained by Radiation Hybrid Analysis Type and compared with measurement data.

    TWP_to_Planar_Glass_1

    TWP_to_Planar_Glass_2

    Electromagnetic interference between cable harness and single wire is measured in EMCoS measurement laboratory. Simulation model is represented in the following figure.

    TWP_to_Planar_Glass_3

     

     

    Numerical Results

    Comparison of simulated transmission coefficient between cable and antenna simulation results with measurement data is shown below:

    TWP_to_Planar_Glass_4

     

    Conclusions

    Results of application example show that simulation results are in good agreement with measurements.